Triumph Traction Control (Ttc) Indicator Light - Triumph Tiger XR Owner's Handbook Manual

Triumph Traction Control (TTC)
Indicator Light
The TTC indicator light is used
to indicate that the traction
control system is active and is
working to limit rear wheel slip
during periods of hard acceleration or
under wet or slippery road conditions.
TTC Indicator Light Operation:
TTC Switched On (Road Setting):
• Under normal riding conditions the
indicator light will remain off.
• The indicator light will flash rapidly
when the traction control system is
working to limit rear wheel slip
during periods of hard acceleration
or under wet or slippery road
conditions.
TTC Switched On (Off Road Setting) -
Tiger XR , Tiger XR , Tiger XC
X T
Tiger XC only
A
• Under normal riding conditions, the
indicator light will flash slowly to
indicate that the TTC system is set
to Off Road.
• The TTC indicator light will flash
rapidly when the traction control
system is working to limit rear wheel
slip during periods
acceleration or under wet or slippery
road conditions.
TTC Switched Off:
The indicator light will not illuminate.
Instead the TTC disabled warning light
will be illuminated (see page 28).
General Information
Note:
• Traction control will not function if
there is a malfunction with the ABS
system. The warning lights for the
ABS, traction control and the MIL will
be illuminated.
and
X
1. Traction control indicator light
If the traction
functioning, care must be taken when
accelerating
wet/slippery road surfaces to avoid
rear wheel spin. Do not continue to
ride for longer than is necessary with
of hard
the Engine
Malfunction Indicator Light (MIL) and
traction
illuminated. Contact an authorised
Triumph dealer as soon as possible to
have the fault checked.
Hard acceleration and cornering in
this situation may cause the rear
wheel to spin resulting in loss of
motorcycle control and an accident.
1
Warning
control is not
and cornering on
Management System
control warning lights
29