KT2 - KT2C - KTL2 - KTL2C SYMBOLS K-array declares that this device is in compliance with applicable CE standards and regulations. Before putting the device into operation, please observe the respective country-specific regulations! WEEE Please dispose of this product at the end of its operational lifetime by bringing it to your local collection point or recycling center for such equipment.
AV presentations, department stores and in hidden locations such as chancel steps in houses of worship. The KT2 and KT2W come with a wall bracket for fixed installations or surface applications. The KT2C and KT2CW come with ceiling brackets for ceiling mounts.
6. UNPaCKING Each K-array amplifier is built to the highest standard and thoroughly inspected before leaving the factory. Upon arrival, carefully inspect the shipping carton, then examine and test your new amplifier. If you find any damage, immediately notify the shipping company.
KT2 - KT2C - KTL2 - KTL2C 11. aCCESSORIES The new Tornados are compatible with a variety of accessories which can be ordered directly from K-array sales@k-array.com..iD you know that Designed as passive speaker, the new Tornados can be easily converted into self-powered devices by inserting the KA1-T2H amplifier module.
12. SERVICE To obtain service: 1) Contact the official K-array distributor in your country. Your local distributor will direct you to the appropriate service center. 2) If you are calling for service, please have the serial number(s) of the unit(s) available for reference.
KT2 - KT2C - KTL2 - KTL2C 13. SPECIfICaTIONS KT2 specs KT2C specs Acoustics 18 W Speaker power handling (AES) 8 - 32 (settable) Impedance 150 – 18 kHz Frequency range (-10 dB) 101 dB (cont.) – 107 dB (peak)
Page 14
KT2 - KT2C - KTL2 - KTL2C KTL2 KTL2C Acoustics 18 W Speaker power handling (AES) 8 - 32 (settable) Impedance 150 – 18 kHz Frequency range (-10 dB) 101 dB (cont.) – 107 dB (peak) Maximum SPL Coverage 90°...
Page 15
KT2 - KT2C - KTL2 - KTL2C The contents of this manual are furnished for informational purposes only. K-array s.u.r.l. assumes no responsibility for any errors or inaccuracies that may appear in this manual. K-array s.u.r.l. reserves the right to make modifications without prior notice.
Page 16
K-array s.u.r.l. Via Paolina Romagnoli - 50037 San Piero a Sieve (Firenze) - Italy tel. +39 055 8487222 - fax. +39 0558487238 e-mail: info@k-array.com www.k-array.com...
Need help?
Do you have a question about the KT2 and is the answer not in the manual?
Questions and answers