Ide Configuration - Nexcom NDiS M324 User Manual

Multi-media solutions digital signage platform
Table of Contents

Advertisement

Chapter 4: BIOS Setup
Hardware Prefetcher
Turns on or off the mid level cache (L2) streamer prefetcher.
Adjacent Cache Line Prefetch
Turns on or off prefetching of adjacent cache lines.
Intel
Virtualization Technology
®
When this field is set to Enabled, the VMM can utilize the additional
hardware capabilities provided by Vanderpool Technology.
Socket 0 CPU Information
This section displays the information of the CPU installed in Socket 0.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Main
Advanced
Chipset
PCIPnP
Socket 0 CPU Information
Intel(R) Celeron(R) CPU J1900 @ 1.99GHz
CPU Signature
30673
Microcode Patch
320
Max CPU Speed
1990 MHz
Min CPU Speed
1334 MHz
Processor Cores
4
Intel HT Technology
Not Supported
Intel VT-x Technology
Supported
L1 Data Cache
24 kB x 4
L1 Code Cache
32 kB x 4
L2 Cache
1024 kB x 2
L3 Cache
Not Present
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
Exit
Security
Socket specific CPU Information
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

IDE Configuration

This section is used to configure the IDE drives.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Main
Advanced
Boot
IDE Configuration
SATA Mode
SATA Port0
Not Present
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
SATA Mode Selection
Configures the SATA as IDE or AHCI mode.
IDE
This option configures the Serial ATA drives as Parallel ATA
physical storage device.
AHCI
This option configures the Serial ATA drives to use AHCI
(Advanced Host Controller Interface). AHCI allows the storage
driver to enable the advanced Serial ATA features which will
increase storage performance.
43
Security
Save & Exit
Select IDE / AHCI
[AHCI Mode]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NDiS M324 User Manual

Advertisement

Table of Contents
loading

Table of Contents