Replacing The Oven Light - Elba COOK MASTER line Instructions For Use Manual

ASSEMBLY AND DISMANTLING OF
THE SIDE RUNNER FRAMES
– Assemble the wire racks to the oven
walls using the 2 screws (Fig. 7.6).
– Slide the tray and rack into the runners
fig. 7.7.
The rack must be fitted so that the
safety catch, which stops it sliding out,
faces the inside of the oven.
– To dismantle, operate in reverse
order.
Fig. 7.7
40

REPLACING THE OVEN LIGHT

Before any maintenance is started
involving electrical parts of the appliance,
it must be disconnected from the power
supply.
– Let the oven cavity and the heating
– Switch off the electrical supply;
– Unscrew the protective cover (fig. 7.8);
– Unscrew and replace the bulb with a
– Refit the protective cover
NOTE: Oven bulb replacement is not
covered by your guarantee
Fig. 7.6
elements cool down;
new one suitable for high temperatures
(300°C) having the following specifica-
tions: 230-240V 50 Hz, 15W, E14
Fig. 7.8
2
1