Camus Hydronics DRH300 Installation, Operation And Service Manual page 43

7) Press the reset button on the ignition control within the alotted time
Master Boiler
8) Press
and
9) Press [Lead Lag Master Configuration]
10) Press [Advanced Settings >]
to arrive at Outdoor Reset
11) Press the
12) Select Enable: Enabled
13) Select Maximum outdoor temperature (WWSD)
14) Select Minimum outdoor temperature (Outdoor Design)
15) Select Low Water Temperature (Min. Water Temp)
16) Select Outdoor boost maximum off point (Design Max.)
17) Press [Show Line] to confirm reset curve
18) Press the to arrive at Warm Weather Shutdown
19) Select Enable = Shutdown after demand ends
37