Setup > Change Password; Setup > Change Authorization Level; Setup > Authorization > Set User Authorization Level; Setup > Authorization > Enable / Disable Remote Control - Gamatronic Centric 50 kVA User Manual

6.1.11 Setup > CHANGE PASSWORD
Use this function to change the administrative password. The administrative password is required
when executing certain functions.
6.1.12 Setup > CHANGE AUTHORIZATION LEVEL
This function allows you to change the current security level of the software interface.
6.1.12.1 Setup > Authorization > SET USER AUTHORIZATION LEVEL
There are three security levels: User, Technician, and Super-User.
The "Technician" and "Super-User" levels have access to additional capabilities and menu
fuctions; the additional functionality is hidden from the "User" level.
6.1.12.2 Setup > Authorization > ENABLE / DISABLE REMOTE CONTROL
Use this function to enable or disable remote access to the system. This controls access to the
Centric user interface and all of its functionality from a remote terminal over a network.
CENTRIC User Guide, Release 0.3
Gamatronic Electronic Industries Ltd.
Figure 43: "Setup > Password"
Figure 44: "Setup > Authorization" option
53