6.4
PROFILE
The PROFILE function displays a summary of the operating parameters of various parts of the
system.
6.4.1
Profile > SYSTEM
Lists the current values for a number of basic system settings, including:
•
Nominal power.
•
Number of phases.
•
Nominal ac voltage.
•
Nominal frequency.
•
Number of modules.
•
Number of modules for redundancy.
More information about these parameters is available in section 6.1.1 "Setup > SYSTEM" on
page 21.
6.4.2
Profile > BATTERY
Lists the current values for a number of important battery parameters, including:
•
Nominal charger voltage.
•
Battery low limit voltage.
•
Rectifier voltage at battery test.
•
End-of-backup battery voltage limit.
•
Automatic battery test period (in
weeks).
•
Test duration limit.
•
Current sensor status (active/inactive).
More information about these parameters is available in section 6.1.3 "Setup > BATTERY" on
page 25.
58
Gamatronic Electronic Industries Ltd.
Figure 48: "Main Menu > Profile" options
•
•
•
•
•
•
•
•
•
•
•
•
Number or battery cabinets.
Operation mode (stand-alone or parallel).
Automatic restart (enabled/disabled).
Shutdown by long ac fail (enabled/disabled).
Last maintenance date.
Current limit (enabled/disabled).
Current limit values (in amps).
Battery cabinet capacities (in Ah).
Temperature sensor status (active/inactive).
Temperature compensation status (active/inactive).
Temperature compensation factor (mV/°C).
Limit dc voltage at compensation (400 – 440V).
CENTRIC User Guide, Release 0.3