Modbus (Optional Feature); Figure 25: Defining Modbus Communication Parameters - Gamatronic Centric 50 kVA User Manual

Gamatronic Electronic Industries Ltd.
6.1.6.4

Modbus (optional feature)

The ability to use a Modbus link with the Centric is an optional feature, available by special order.
To define a Modbus link between the Centric and another device on the network, specify a serial
port (one of the available "COM" ports in the list), indicate the address of the slave device (from 1
to 247), and specify the transmission protocol to be used (RTU or ASCII).

Figure 25: Defining Modbus communication parameters

CENTRIC User Guide, Release 0.3 37