User Interface; Control Panel; Figure 4: The Control Panel - Gamatronic Centric 50 kVA User Manual

Gamatronic Electronic Industries Ltd.
U
3.
SER INTERFACE
This section describes the buttons and indicators used to operate the Centric .
3.1

Control panel

The LCD control panel (Figure 2) is the user's main interface with the Centric. The LCD panel is
touch-sensitive – the user navigates through the system screens by pressing lightly on the
various icons. On all screens other than the main menu screen, the current navigation path is
displayed in the upper-left corner of the screen (Figure 3), enabling you to easily understand
where you are within the control system menus.
The navigation path in the upper-left corner of the screen is also used to navigate backwards – to
return to a previous screen or to the main menu.
The extensive capabilities of the user interface are described in detail in chapter 6 "Centric menu
functions in detail".

Figure 4: The control panel

The LCD control panel is attached to the front of the UPS and is active when the UPS is
connected to ac power and also when the UPS is operating in battery mode.
There is a physical power on/off button on the control panel that controls the power supply to the
screen. If the UPS is connected to ac power or operating in battery mode and the display screen
is blank, ensure that the display unit itself has been powered on.
The display unit is mounted on a holder and can be removed from that holder if necessary. The
angle of the display screen can be adjusted.
CENTRIC User Guide, Release 0.3 7