Decimal Format - NAPCO Gemini GEM-P816 Programming Instructions Manual

!
Page 12
ZONE FEATURES
Exit/Entry Follower
PROGRAM THE DATA ENTRIES
1. Enter the panel's Dealer Security Code, then press
2. Answer NO to all questions until "ACTIVATE PROGRAM Y/N" is displayed; then press YES. NOTE: If you pass
"ACTIVATE PROGRAM", scroll backward using
3. Press to enter the Address Program Mode. Address "0000" will display.
C
4. Press
0506
advance to the data field.
5. Press
6 7 8
activated.
U
6. Press to save. Address 0506 is now programmed with "6,7,8".
7. Enter another 4-digit address to continue programming or press
eration.
B) Decimal Format
Settings (such as Entry and Exit Delay) display and accept data in decimal format, as a 3 digit number. Data is en-
tered directly, by pressing keys 0 – 9, with the cursor automatically moving to the right upon each key press.
EXAMPLE: DECIMAL Format with the GEM-RP1CAe2: Program Abort Delay to be 15 seconds.
0715 - - -
Address DATA ENTRY LOCATION:
0715
"Abort
•
No time yet entered
Delay"
DETERMINE THE DATA ENTRIES
1. Referring to SYSTEM DELAYS & TIMEOUTS in the Programming Worksheets that follow, the Abort Delay is
located at address 0715:
ABORT
DELAY
(sec.)
[Default = 0 sec. = blank (•)]
PROGRAM THE DATA ENTRIES
1. Enter the panel's Dealer Security Code, then press
2. Answer NO to all questions until "ACTIVATE PROGRAM Y/N" is displayed; then press YES. NOTE: If you pass
"ACTIVATE PROGRAM", scroll backward using
3. Press to enter the Address Program Mode. Address "0000" will display.
C
4. Press
0715
X
GEM-P816 Programming Instructions
ZONES 1 " 8
ADDR Z1 Z2 Z3 Z4 Z5 Z6 Z7 Z8
1 2 3
0506
B
to access Address 0506. The existing data will display and the cursor will
. The numbers 6,7 and 8 will appear on the keypad display indicating the zones
D

Decimal Format

ADDRESS 0715
B
to access Address 0715. The existing data will display and the cursor will
ADDR
4 5 6 7 8
0561
6 7 8
.
R
.
C
0715 015
Address
0715
"Abort
Press 0 1 5 in order to set
Delay"
"Abort Delay" to 15 seconds. The "D" on the
right indicates "Decimal" format.
.
R
.
WI995C 2/04
ZONES 9 " 16
Z9 Z10 Z11 Z12 Z13 Z14 Z15 Z16
1 2 3 4 5 6
to exit and resume normal keypad op-
D
DATA ENTRY LOCATION:
Decimal Format
L
NAPCO Security Systems
7 8