Trunk Flash; Record A Call - Mitel 3300 IP 5312 IP User Manual

8. At the prompt to verify the PIN, re-enter your new PIN again. The set confirms
successful or failed completion.
9. Press (MENU) to end the Menu session.

Trunk Flash

The Trunk Flash feature allows you to access Centrex features (if available) while you are
talking on an outside call.
To flash a trunk while talking on an outside call:
1. Press (TRANS/CONF).
2. Dial the appropriate feature access code for a single flash or a double flash.
3. Wait for dial tone.
4. Dial the Centrex feature access code.

Record a Call

This feature uses your voice mail system to record your telephone conversations. Note: You
may be required by law to inform the other party that you are recording the conversation. For
specific instructions, consult your system administrator.
To start recording while on a 2–party call:
• Press the Record Call key. (See Feature Keys elsewhere in this guide for instructions
on programming a Record Call key to your phone.)
Note: Your system may be programmed to automatically begin recording external calls
when you or the other answers.
To control recording on a 5312 IP Phone, do one or all of the following:
• To stop and save a recording, press the Record Call feature key.
• To stop and erase a recording, press
5312/5324 IP Phones User Guide
(CANCEL).
- 37 -