Ap/ Bridge Mode; Access Point Mode - D-Link DAP-1155 User Manual

Section 2 - Installation

AP/ Bridge Mode

How you use your DAP-1155 will determine which mode you choose on the DAP-1155. This section will help you figure out
which setting works with your setup.

Access Point Mode

In Access Point mode, the DAP-1155 acts as a central connection point for any computer (client) that has a 802.11n or backward-
compatible 802.11b/g wireless network adapter and is within range of the AP. Clients must use the same SSID (wireless network
name) and channel as the AP in order to connect. If wireless security is enabled on the AP, the client will need to enter a password
to connect to the AP. Multiple clients can connect to the AP at the same time in Access Point mode.
Wireless PCs Using the DAP-1155 as a Central Connection Point
D-Link DAP-1155 User Manual 9