Modes And Menus Overview - Novation ReMOTE SL Compact User Manual

MODES AND MENUS OVERVIEW

The vertical column of five buttons to the left of the display are the mode and menu buttons. These allow access to settings
that affect individual controls within a template (Edit), general template settings (Template) and also the overall keyboard
settings (Global). Whilst in any of the 'edit' menus, the screen displays available settings and the encoders and buttons
aligned with a setting can be used to edit it, as follows:
ENCODERS
BUTTONS
BUTTONS
Use the PAGE UP/DOWN buttons to scroll through all pages of available settings in an edit menu. If only using the SL
Compact for Automap Universal, the only edit mode you may need to access is the Global menu. See the Global Mode
section for details.
Here is a breakdown of each mode:
Play mode
This is the default mode for the SL Compact and the one that will be active when the keyboard powers up. This mode
should be active most of the time, as it's the one to use when using Automap or standard templates to control software or
hardware. After making changes to any settings in one of the three edit menus, press the PLAY button to return to play
mode so that the LED next to the button illuminates.
Template menu
This menu allows access to settings that affect the currently selected template. Press the TEMPLATE button to access this
menu and then use the PAGE UP/DOWN buttons to scroll between the two pages of options. Pressing the TEMPLATE
button a second time will access the Keyboard Zones Menu, where the keyboard can be split into zones for playing different
instruments within the same template (see the Keyboard Zones Menu section for details). Repeatedly press the TEMPLATE
button to switch between the Template Menu and Keyboard Zones Menu.
Edit mode
This mode allows access to the individual settings of any assignable control within the currently selected template. Controls
that can be edited in this mode are: encoders, buttons, drum pads, transport controls, pedals, pitch and mod wheels.
Press the EDIT button to activate Edit mode and the PAGE UP/DOWN buttons to scroll between the pages of settings for
the currently selected control (where available). To activate a different control for editing in this mode, press and hold down
the EDIT button and operate the control.
LCD SCREEN
INCREASE X/
DECREASE X
INCREASE X
X
DECREASE X
CONTROLS THAT EFFECT X
8