Ableton Live Automap - Novation ReMOTE SL Compact User Manual

ABLETON LIVE AUTOMAP

To set up Ableton Automap, carry out the following steps:
1. Make sure you have Ableton Live 5.2 or later. If you need to update Live then you can download the latest version from
www.ableton.com.
2. Connect the SL Compact to your computer and open Live. Go to the 'MIDI/Sync' page of the Live preferences and set the
options as shown in the following screenshot:
NOTE: The Input AND Output of the SL Compact in the 'Control Surfaces' section should be set to SL Compact Port 2.
3. Exit the preferences and start using Live!
The Live Automap template (template 40) must be selected on the SL Compact when using it in Live Automap mode. Once
you have followed the above set up instructions, the SL Compact will automatically switch to the Live Automap template and
will do so each time you subsequently start Live. Whilst using the SL Compact in Live Automap mode, you can switch to any
other template on the unit (for example to control hardware MIDI devices, or Automap-wrapped AU plug-ins using the
Automap Universal template) and then switch back to the Live Automap template to control Live again.
26