Sonar Automap - Novation ReMOTE SL Compact User Manual

SONAR AUTOMAP

Sonar uses the Automap Universal template (template 38) for mixer control, however some set up is required in the
sequencer before it will work:
1. Make sure you have the latest version of Sonar 6. If you need to update then you can download the latest version from
www.cakewalk.com.
2. Connect the SL Compact to your computer, switch it on and launch Sonar.
3. In Sonar select 'Controllers/Surfaces...' from the 'Options' menu.
4. In the 'Controllers/Surfaces' window click the star icon to add a new control surface.
5. The 'Controller/Surface Settings' window will appear. Set the Controller/Surface to 'Novation Automap Universal' and
set the Input Port and Output Port to '---None---', then click 'OK' and close the 'Controllers/Surfaces' window.
Now run the Automap Universal Server software. The SL Compact will automatically switch to the Automap Universal
template. The mixer parameters will automatically be mapped to the SL Compact, unless an Automap-wrapped plug-in has
Automap focus, in which case you can switch to controlling the mixer by pressing and holding the SHIFT button (also labelled
DRUMPADS) and using the PAGE UP/DOWN buttons to select [your project name].
With Cubase Mixer selected, you can use the SL Compact's controls as follows:
Cycle through available sends Control sends, panning, track faders Control solos, record arming, mutes
Bank to other
mixer tracks and
(with SHIFT held
down) switch
between the mixer
and any active VSTs
Sends Panning Track Solos Records Mutes Activate
faders Automap
Menu
38