Saving And Naming Templates; Restoring Templates - Novation ReMOTE SL Compact User Manual

SAVING AND NAMING TEMPLATES

Before you perform a save operation, make sure that Memory Protect is set to OFF in the Global Menu (see page 40).
When you save a template, the following data is stored and will be recalled when you next select that template:
-All settings for each individual control, as set in Edit Mode.
-All settings in the Template Menu
-All settings in the Keyboard Zones Menu
-All settings in the Quick Menu (accessed in Play Mode)
-The current keyboard octave setting
-The currently selected encoder and button groups and row-select status
-The current value of each assignable control
-The control currently assigned to the SPEED DIAL
To save a template, press WRITE when in Play Mode, Edit Mode, the Template Menu or the Keyboard Zones Menu. This
will bring up the template save display:
V-Station-1
<
CHAR
If you want to cancel the save operation, press one of the other Mode/Menu switches (PLAY, TEMPLATE, EDIT or GLOBAL),
which will take you to that mode or menu.
On the template save display, you can set the template name that is shown on the top line of the display. The control name
can be a maximum of 48 characters long. To enter a character, first use the encoders or buttons in line with the '<' and '>'
symbols on the display to move the cursor to where you want to enter the character. Then, use the buttons in line with
'Upper', Lower' and 'Punctu'/'Number' to select the type of character you want to enter (upper case, lower case,
punctuation or number). Note that repeated presses of BUTTON 6 will switch between 'Punctu' and 'Number'. Finally, use
the encoder or buttons in line with 'CHAR' to select the character you want to enter. If you want to enter a space, select
'Punctu', as the first punctuation character is a blank space.
Once you have set the template name, use the encoder or buttons in line with 'To Template' to select the template memory
location that you want to save the template to. Finally, to complete the save operation, press WRITE once more.

RESTORING TEMPLATES

If you edit a template and then accidentally select another template without remembering to save your edits, you can restore
the last edited template by pressing the SPEED DIAL when in Edit Mode, the Template Menu or the Keyboard Zones Menu.
The SL Compact display will then look as follows:
V-Station-1
Template 1 An Edited but saved version of this template is available
The name and number of the template which you last edited will be shown. Press WRITE to restore the template with
the edited settings. This template will automatically be selected and you can press WRITE to save it using the template
save procedure descibed above.
Novation
>
Upper Lower
Novation
Punctu
(WRITE to Restore)
To Template
1
61