Novation ReMOTE SL Compact User Manual page 67

Oddity
Location: Templates 13 and 14
Title: Oddity 1 and 2
A group of two standard templates that mainly follow the standard synth parameter layout is used for Oddity. Additional osc
parameters are assigned to ENCODERS GROUP B and BUTTONS GROUP B2. HPF cutoff is assigned to ENCODER 6 in
GROUP B. VCA and VCF velocity amounts are assigned to ENCODERS 7 and 8 in GROUP C.
Minimonsta
Location: Templates 15 and 16
Title: Minimonsta 1and 2
A group of two standard templates that mainly follow the standard synth parameter layout is used for Minimonsta.
ENCODERS GROUP A are assigned to Osc 1 and Delay parameters on template 1 and Osc 2 and Osc 3 parameters on
template 2.
MS-20
Location: Template 17
Title: MS-20
This template follows the standard synth parameter layout. BUTTONS GROUP B2 are assigned to Osc 2 parameters.
PolySix
Location: Template 18
Title: Polysix
This template mainly follows the standard synth parameter layout. ENCODERS GROUP C and BUTTONS GROUP B3 are
assigned to the arpeggiator parameters.
LegacyCell
Location: Template 19
Title: LegacyCell
ENCODERS GROUP A are assigned to the encoder parameters and ENCODERS GROUP C are assigned to the slider
parameters.
CS-80V
Location: Templates 20 and 21
Title: CS-80V-1/2
A group of two standard templates is used for the CS-80V. Before using these templates you must copy a mapping file to
your computer. Locate the file 'controlMidi' in the CS-80V resources folder on the SL Compact DVD and copy it to the
following location:
PC – C:\Program Files\Arturia\CS-80V\save
Mac – HD/Library/Preferences/Cs80V/save
67