Pot Modes; Pot Mode: Banking - Novation FLkey 49 User Manual

Pot Modes

The FLkey has eight pots to control various parameters inside FL Studio depending on the pot mode.
To access pot modes:
1. Hold (or double press to latch) Shift to enter shift mode. The pads light up. The top row of pads
represents the pot modes. The text above each pad shows you the pad's pot mode.
2. Press a pad to select the pot mode you want to use. The table below lists FLkey's pot modes.
When you enable 'Pickup (takeover mode)' inside FL Studio's MIDI settings, the pot needs to reach the
original value before the changes apply to the parameter connected to the current pot.
Pot Mode
Plugin Plugin mode controls eight parameters, dependent on the plugin in focus.
The screen shows the parameter name together with the new value temporarily.
Mixer Volume Mixer Volume mode maps the mixer faders in banks of eight to the pots.
Mixer Pan Mixer Pan mode maps the Mixer Pan pots, in banks of eight, to the pots.
Channel Volume Channel Volume mode maps the Channel Volume pots in banks of eight to the pots.
Channel Pan Channel Pan mode maps the Channel Panning pots in banks of eight to the pots.
Custom You can assign the eight pots to custom parameters

Pot Mode: Banking

When you're in the pot modes for Mixer or Channel settings you can bank between mixer tracks or
channels. While using Channel Rack Pad mode navigation banks in groups of eight so the pots line up
with the bottom row of pads; in all other pad modes banking moves one Track or Channel at a time.
• In Mixer Volume and Mixer Pan pot modes press the ◀ or ▶ buttons under the 'Mixer' label to
move the selection to the previous/next track(s). The red selection in FL Studio shows which
bank the pots control.
• In Channel Volume or Channel Pan pot modes press the Channel Rack ▼ or Channel Rack ▲
to move the selection to the previous/next track(s). The red selection in FL Studio shows which
bank the pots control.
FLkey User Guide
Use
15