Novation ReMOTE SL Compact User Manual page 65

Here is a guide to each standard Template:
V-Station
Location: Templates 1, 2 and 3
Title : V-Station 1,2 and 3
A group of three standard templates is used for the V-Station. The templates follow the general synth parameter layout but
additional arpeggiator parameters are assigned to BUTTONS GROUP B3.
Bass-Station
Location: Template 4
Title: Bass Station
This template follows the general synth parameter layout, however no controls are available for individual oscillator levels on
the Bass Station so instead ENCODER 1 in GROUP A is assigned to the osc mix level.
FM7
Location: Template 5
Title: FM7
Before using the FM7 template, you must import a mapping file into the plug-in. To do this go to the 'Master' page in the
plug-in window and click 'Load' in the 'Controller Define' section. Locate the file 'RemoteSL.f7c' in the FM7 resources folder
on the SL Compact DVD and click 'Open'. Once you have done this, click 'Pref' to access the FM7 preferences and make
sure the following options are checked/set:
MIDI controller range 000-127
0...63: off / 64...127: on
Use op A controllers for selected op (op select controller: 9)
Use 3 CCs for ratio
The SL Compact FM7 template will then map correctly to the software. You can save the 'RemoteSL.f7c' file to your
computer with the other mapping files that come with the FM7, stored in the following location:
PC – C:\Program Files\Native Instruments\FM7\Assigns
Mac – HD/Applications/FM7/Assigns
The envelope and filter parameters are assigned as in the general synth parameter layout. ENCODERS GROUP A are
assigned to the operator parameters where ENCODER 1 selects the operator and ENCODERS 2-8 can be used to control
the selected operator.
65