Hughes Jupiter HT1100 Installation Manual page 42

Chapter 7 • Activating the terminal
42
1039649-0001 Revision C
Figure 31: Activation screen
6. Enter the SAN and PIN. The SAN and PIN are provided on the customer's
Order Confirmation email and on the Installation Reference Sheet. Click
Continue.
7. After the SAN and PIN information is entered and validated, a screen appears
that includes the customer's name and other details as shown in Figure 32.
Figure 32: Confirm screen
Note: It is very important that the SAN and PIN match the customer's name
and address. Check this information carefully and verify it with the
customer.
8. Click Confirm. The Terminal Activation Successful screen appears as shown in
Figure 33.