Table of Contents
Advertisement
2.1 UNPACKING THE FIRE
Carefully lift the fire out of the carton. Remove the loose item packaging carefully from the front of
the appliance. Check the contents as listed :-
Packing Check List
1off
Fire box / burner assembly
1off
Trim
1off
Loose items bag.
1off each
User instruction book and Installation book.
2.2 INSTALLING THE FIRE BOX
a) Remove the Top Infill Panel, Pilot Heat Shield and Glass Frame as shown in section 4 to allow
access to the burner
b) Ensure that the hearth is protected from damage and carefully lift the firebox into the fire
opening, then slide it back into position. Check that the firebox flange fits flush to the sealing
face of the fire surround or wall with no gaps present.
c) Remove the four retaining screws securing the burner to the firebox. The base of the burner
unit can now be pulled forward, allowing the burner to be removed outwards and downwards
from the firebox. See below.
Four
retaining
screws
Supplied By www.heating spares.co Tel. 0161 620 6677
SECTION 2
INSTALLATION OF FIRE
8
Advertisement
Table of Contents
