Attaching Satellite Dish To Unit - Maxview Crank Up B2590/65 Installation & Operating Instructions Manual

Attaching the Satellite Dish to the Antenna Unit
1. Ensure Antenna Unit is free from obstacles.
2. Turn the azimuth lock lever to the green position (locked for travel)
3. Elevate the antenna to 25 degrees (25 turns = 25 degrees)
Azimuth Lock is Green - LOCKED for travel
Wind handle clockwise 25 turns to reach 25 degrees
Azimuth Lock is green - LOCKED for travel
Note: The Home Position will go past the Elevation Window during the 25 turns, this is normal operation
4. Fix satellite dish to Antenna Arm using M6
Button Head Screws, M6 Nuts and 6mm
Plastic Washers. The 65cm and 85cm satellite
dishes have different fixing hole positions.
Therefore 4 of the holes will be unused.
5. Remove all tools, packaging and obstructions
from roof.
Page 12
Elevation Window Antenna up
Wind handle clockwise 25 turns to reach 25 degrees
6. Finally, carefully remove the green transit tape
from Antenna Unit in 2 places.
Caution: Replace Nylon locking nuts if they
have been removed more than twice.
The locking action of the Nylon becomes less
effective if repeatedly assembled and
disassembled.