Replacing The Status-Light Board; Procedure; Post-Requisites - Dell Edge Gateway 5000 Series Service Manual

Replacing the status-light
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Procedure

1 Place the status-light board. on the base frame
2 Replace the screws that secure the status-light board to the base frame.

Post-requisites

1 Replace the DIP switch
2 Replace the base
3 Replace the mobile broadband
4 Replace the wireless
5 Replace the solid-state
6 Replace the top
computer. After working inside your
board.
frame.
card.
card.
drive.
cover.
After working inside your
39