Table of Contents
Advertisement
3
Place the front end of the
laser lens cover into its instal-
lation rail.
4
Carefully insert the laser lens
cover and check to make sure
it is fully inserted.
Attention
If the laser lens cover is not properly installed, serious damage to
the printer could result.
5
Continue with replacing the OPC drum cartridge.
Installing the New OPC Drum Cartridge
1
Remove the new OPC drum
cartridge from its shipping box.
Attention
Keep the protective sheet on the cartridge. Do not touch the
protective sheet on the photosensitive (green) surface or scratch the
surface. This could lower image quality.
Make sure the transfer belt left release lever is still set to its top position
(12 o'clock).
Replacing the OPC Drum Kit
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
17
Advertisement
Table of Contents
