Table of Contents
Advertisement
6
Now you need to "put" the system file. Type
put x
where
The downloading process takes several minutes.
Microsoft<R> Windows 98
DOSKey installed
C:\WINDOWS\Desktop>ftp 161.33.128.5
Connected to 161.33.128.5.
220 QMS CrownNet Rev 4.61 ready.
User <161.33.128.5:<none>>:
331 User name ok, need password
Password:
230 User logged in
ftp> binary
200 TYPE set to 1.
ftp> put c:\filename.img
200 PORT command successful.
150 Opening data connection for
FILENAME.IMG <161.33.131.62.4.21>, <mode binary>.
226 Transfer complete.
ftp: 285 bytes sent in 0.00Seconds 285000,00Kbytes/sec.
ftp>
7
At the ftp> prompt, end the ftp session by typing
quit
Downloading the System File via Parallel
Use the following procedure for installing a system file via the parallel port.
Attention
Connect the parallel port of the printer to your computer prior to turning on
the printer and computer. Turn the printer on first, then the computer.
1
Turn on the printer.
2
From the Start menu choose Run...
Updating System Software
is the name of the system file.
x
87
Advertisement
Table of Contents
