Table of Contents
Advertisement
4
Close the right-side cover.
The media jam error message is cancelled.
5
Check the release button to make sure the cover is securely closed.
6
If media was removed in step 1, open the multipurpose tray.
7
Shuffle the media that was removed in step 1 and
even up the front edges.
8
Reinsert the media printing face down.
Make sure the media is lying flat and doesn't
exceed the media limit mark. Check the media
width guides for correct positioning.
Media Jams near the Optional Duplex Unit
1
Open the top cover.
Attention
Do not pull jammed media from the top of the printer
through the fusing rollers.
This prevents any unfused toner from dirtying the
fuser rollers.
Clearing Media Jams
99
Advertisement
Table of Contents
