Table of Contents
Advertisement
This message...
CANCELLING JOB
ENERGY SAVER
IDLE
MAILBIN POWER OFF
MEDIA MISMATCH
OUTPUT BIN FULL
Status, Error, and Service Messages
means...
The Cancel key has been
pressed, and the print job in the
print queue is being canceled.
The printer is in energy saver
mode to reduce power con-
sumption during periods of inac-
tivity. When a print job is
received, the printer returns to
normal power within 90 sec-
onds. While in "deep sleep," the
printer's message window will
not display operator status such
as door- and tray-open mes-
sages. The printer remains in
"deep sleep," until a print job is
received, or until the printer is
manually switched from offline
to online.
The printer is on line, but no
jobs are in process.
The mailbox unit power is off.
The media detected in the tray
doesn't match the media
setting.
The media has exceeded the
limit in the specified output bin.
Do this...
Press Select and the job
in the print queue will be
canceled.
No action needed.
No action needed.
Turn off the printer, turn
on the mailbox unit, then
turn on the printer.
Change the media in the
tray or change the
media setting .
Remove the media from
the specified output bin.
123
Advertisement
Table of Contents
