Minolta Magicolor 2200 User Manual page 26

4
Remove the fuser oil
roller.
Hold it by the green
handle only.
5
Place the fuser oil roller
on a level surface.
Attention
Since the fuser oil roller removed here is to be installed in the new fuser unit,
handle it with care. If you set the fuser oil roller on the table, do it as shown in
the illustration. Do not allow the roller surface to contact the table or get dirty.
This could lower image quality.
6
Turn the release levers to release the fuser unit.
18 Replacing the Fuser Unit and Transfer Roller Kit