Memory Overflow - Minolta Color PageWorks 0990-7701-02 User Manual

LCD Message
REMOVED
XXXXX TONER
REMOVED
DRUM UNIT
REMOVED
WASTE BOTTLE
REMOVED
OILING ROLLER
WARNING
COVER OPEN
WARNING
PAPER JAM 1
WARNING
PAPER JAM2
WARNING
PAPER JAM3
RESET TO SAVE
CONTEXT SAVE
CHANGE

MEMORY OVERFLOW

BUFFER FULL
DATA TOO COMPLEX
2. A Problem Exists in the Preparation Stage and During a Print Cycle
Description
The toner cartridge isn't present.
The drum cartridge is missing.
The waste toner bottle is missing.
The Oiling Roller or fusing unit is
missing.
The front cover or the rear cover of
the printer were not closed cor-
rectly.
A paper jam occurred near the
paper take-up section.
A paper jam occurred between the
paper take-up section and the fus-
ing section.
A paper jam occurred between the
fusing section and the paper exit
section.
During the printing cycle, one or
more printer settings were changed.
The setting for PCL CONTEXT
SAVING or PS CONTEXT SAV-
ING has been changed.
The printer has received more data
than can be fit into its internal
memory.
A buffer full error occurred .
The data sent can't be processed
because it is too complex.
Action
Mount the Toner Cartridge.
Mount the Drum Cartridge.
Mount the Waste Bottle.
p. 56
Mount the Oiling Roller.
Mount the Fusing Unit.
p. 62
Close the Front Cover.
p. 18
Close the Rear Cover.
p. 18
Remove the sheet of paper misfed.
For details, see "When a Paper Misfeed has
Occurred."
p. 80
If you want the current printing cycle to use the
new setting, stop the printing cycle using the JOB
& MEMORY function.
When printing has stopped, initiate a new printing
cycle.
pp. 36, 38, 40
If you do not want the current printing cycle to
use the new setting, press the Proceed key to
resume the current printing cycle.
The new setting will be used in the next printing
cycle.
Press the Proceed key. When "READY" appears
on the display, the new setting for CONTEXT
SAVING has been entered. Please refer to MEM-
ORY MENU in Chapter 3 for details.
p. 45
.
Press the Proceed key.
The printer returns to the On-line state.
Run the print cycle again.
77
p. 48
p. 56
p. 56