Minolta Color PageWorks 0990-7701-02 User Manual page 26

Take the PostScript ROM out of its carton.
-
5
Check which type of Controller board is installed
-
in your printer.
Mount the PostScript ROM in the socket
-
(SIMM2) at the location shown on the controller
board.
SIMM2
SIMM2
Insert the PostScript ROM pin into the socket.
-
6
Push the PostScript ROM down in the direction of
-
7
the arrow.
Check that the PostScript ROM is mounted
-
8
securely.
Left Side
Controller board (a)
Controller board (b)
Right Side
Insert the controller board into the guide rails.
-
9
Secure the controller board in position with the
-
four screws.
Reconnect the interface cable or network cable.
-
10
11
- This completes the procedure to mount the
PostScript ROM in the printer.
- You now install the printer driver (software).
Read the PostScript User's Guide separately
provided (that is shipped together with the
accessories that come with this Adobe
PostScript ROMM SIMM set) and install the
printer driver according to the operating system
of the host computer to be used.
13
3. Setting-Up