When A Message Appears - Minolta Color PageWorks 0990-7701-02 User Manual

76
2. A Problem Exists in the Preparation Stage and During a Print Cycle

When a Message Appears

LCD Message
WARMING UP
OFF LINE
PROCESSING
DATA COMPRESSION
TRAY X PAPER LOW
LOAD XXX
TRAY X
LOAD XXX
IN MANUAL
TRAY X EMPTY
TONER LOW XXXXX
TONER EMPTY
XXXXX
PLEASE WAIT
XXXXX
DRUM ALMOST USED
REPLACE
DRUM UNIT
REPLACE
WASTE BOTTLE
Description
The Printer is warming up.
Printer cannot receive data from
Host computer.
- Receiving data from the host
computer.
- The printer is making a print
image.
Compressing data from the host
computer
Tray2 or Tray3 is almost out of
paper.
The specified paper doesn't exist in
the specified cassette.
Print Menu is set to Manual Feed.
p. 41
Tray1, Tray2 or Tray3 is paper
empty.
The toner is low but still can print.
The toner is empty.
The Toner Cartridge is being
moved into the replacement posi-
tion.
The drum cartridge is nearing the
end of its reliable life.
The life-time of the drum cartridge
has expired.
The Waste Bottle is full.
Action
Wait for a short while.
Press the On Line key to set the printer into the
On Line state.
Wait for a while.
Wait for a while.
Ready paper for addition.
Change the paper in the cassette for paper of the
specified size.
p.24
Printing will continue with the currently available
paper if the Proceed key is pressed or an Auto-
Œ
continue Time-out occurs.
Load the paper of the specified size in the Tray 1
(multipurpose tray). Then, press the Proceed key.
This prints one page.
Add paper.
p. 26
Ready a new Toner Cartridge for replacement.
Each Press of the Proceed key will allow one
print.
You can still make print, but the image density will
become lighter and lighter. It is recommended therefore
that you change the Toner Cartridge as soon as possible.
p. 48
Change the Toner Cartridge.
Wait for a moment.
The Drum Cartridge, Waste Bottle, and Oiling
Roller have the same replacement frequency.
Ready a new Cartridge for replacement.
The Drum Cartridge, Waste Bottle, and Oiling
Roller have the same replacement frequency.
Change all three of these units for new ones.
p. 56
p. 48