Minolta Color PageWorks 0990-7701-02 User Manual page 81

68
1. Changing Cartridges
14
- Check that the connector from the Image Transfer Belt
15
Unit is positively connected to the connector on the
printer end.
- Install the Waste Bottle by inserting its guide into the
16
printer's rail.
0990U104
Waste Bottle
guide
17
Œ
- Press down on the top face of the Waste Bottle.
18
- The Bottle clicks into place when it is installed
correctly.
- Make sure that the Hook of the Waste Bottle is engaged
securely with the pins of the Image Transfer Belt Unit.
Hook
NOTE
19
- Make sure that the Shutter at the toner exit of the
Image Transfer Belt Unit is open securely.
To start printing with the Shutter closed will lead to
internal contamination, a decline in print quality
and/or a failure.
OK(open)
Shutter
Toner Collecting
Bottle
Green Label
Printer's rail
Pins
NG(closed)
Image Transfer
Belt Unit