Minolta Color PageWorks 0990-7701-02 User Manual page 71

58
1. Changing Cartridges
- Install the Waste Bottle by inserting its
12
guide into the printer's rail.
0990U104
13
- Press down on the top face of the Waste Bottle.
14
- The Bottle clicks into place when it is installed
correctly.
- Make sure that the Hook of the Waste Bottle is engaged
securely with the pins of the Image Transfer Belt Unit.
Waste Bottle
guide
Green Label
Printer's rail
Hook
Pins
NOTE
15
- Make sure that the Shutter at the toner exit of the
Image Transfer Belt Unit is open securely.
To start printing with the Shutter closed will lead to
internal contamination, a decline in print quality
and/ or a failure.
OK (open)
Shutter
Toner Collecting
Bottle
- Gently close the Front Cover.
16
Do not close it violently, because a printer breakdown
could result.
Œ
- You will hear the sound of the printer operating.
- Open the Rear Cover.
17
- Push and hold the button of the Fusing Unit Lock
18
Release Lever, and pull out the Fusing Unit.
Button of the Fusing Unit
Lock Release Lever
NG (closed)
Image Transfer
Belt Unit