Minolta Color PageWorks 0990-7701-02 User Manual page 76

- Install the Image Transfer Roller Unit.
7
- PUSH DOWN ONLY ON THE GREEN SQUARES on
8
the top face of the Drum Cartridge.
- The Cartridge clicks into place when it is installed
correctly.
- Gently close the Front Cover.
9
Do not close it violently, because a printer breakdown
could result.
- You will hear the sound of the printer operating.
- Open the Rear Cover.
10
- Push and hold the button of the Fusing Unit Lock
11
Release Lever and slide out the Fusing Unit.
NOTE
12
- The Fusing Unit is hot. Be careful not to touch the
area carrying the WARNING! HIGH
TEMPERATURE label.
- Before changing the Fusing Unit, wait until its surface
temperature falls and make sure that the temperature
is safe for replacement.
- Remove the installation screws (2 places) in the
13
Fusing Unit.
- Slide the Fusing Unit in the direction shown.
14
- Remove the Fusing Unit from its mount.
1. Changing Cartridges
WARNING!
HIGH TEMPER-
ATURE label
To Be Continued
63