Initialize Current Memory Screen; Input Port Trim Screen - Yamaha TF5 Reference Manual

Initialize Current Memory screen

Resets the console's current memory to the factory default settings. Scene memory and
Libraries are not reset.
1
INITIALIZE button
Initializes the current memory.
The following data is initialized: mixing data and setup data.
Touch to display the confirmation message. Touch the OK button to perform the
operation.
Do not touch any buttons until the initialization is complete.
When initialization is complete, you can continue to use other maintenance features
without exiting.
NOTE
• When initializing the current memory, all data in the current memory will be lost. Use caution when
performing this operation.

Input Port Trim screen

Allows you to adjust the gain of each INPUT jack in 0.01 dB increments.
1
INPUT jack selection buttons
Select the INPUT jack that you want to configure here.
Select the button that corresponds to the INPUT jack you want to configure, and then
use the [TOUCH AND TURN] knob to adjust the value.
After making adjustments, start up the console as usual.
2
Reset All button
Resets all values to 0.00 dB. The factory default setting is also 0.00 dB.
Touch to display the confirmation message. Touch the OK button to perform the
operation.
NOTE
• When the reset is complete, you can continue to use other maintenance features without exiting.
- 73 -
Maintenance screen
TF Series
Reference Manual