Setting The Gate - Yamaha TF5 Reference Manual

7
Hold slider
When the input signal drops below the threshold, this setting determines how much
time passes before the gate closes.
8
Decay slider
After the hold time passes, this setting determines how quickly the gate closes. The value
here is expressed as the time required for the level to change by 6 dB.
9
GR (gain reduction) meter
Displays the amount by which the signal's gain is reduced.
0
OUT (gate output) meter
Displays the gate output level.

Setting the gate

1. Display the GATE screen.
(page
2. Turn on the gate and then touch the slider that you want to adjust.
3. Use the [TOUCH AND TURN] knob to adjust the setting.
Refer to the gate graph and each meter while making adjustments.
You can also drag the slider on the touchscreen to adjust the setting.
5)
GATE screen menu
Press the Menu key ( ) from the GATE screen to display the following options.
- 49 -
Configuration screens
1
Copy icon
Copies the GATE parameters of the selected
channel to the clipboard.
2
Paste icon
Pastes the GATE parameters in the clipboard to the
selected channel.
3
Compare icon
Allows you to compare the GATE parameters of the
selected channel with the GATE parameters in the
clipboard by switching between the two.
4
Default icon
Resets the GATE settings for the current channel to
their default values.
TF Series
Reference Manual