Assigning A Feature To A [User Defined Key] - Yamaha TF5 Reference Manual

FUNCTION PARAMETER1 PARAMETER2
Play/Pause
Stop
Next
Previous
Recorder Transport
Rec
Auto Rec
Rec & Start
Inc
Dec
Store
Recall
Inc Recall
SCENE
Dec Recall
A00–99,
Direct Recall/Store
B00–99
TAP TEMPO
Feature assignment screen
When you select a Function, the items available for Parameter 1 are displayed. Likewise,
when you select an item for Parameter 1, the items available for Parameter 2 are
displayed. Some Functions may not have items available for Parameter 1; some
Parameter 1 items may not have items available for Parameter 2.
Description
Same as the Play/Pause button on the
RECORDER screen.
Same as the Stop button on the RECORDER
screen.
Same as the Next button on the RECORDER
screen.
Same as the Previous button on the
RECORDER screen.
Same as the Rec button on the RECORDER
screen.
Recording stops and the file is saved, and
then recording resumes immediately as a
new file.
Recording starts immediately without
entering record-ready mode.
Same as the INC, DEC, STORE, and RECALL
keys.
Recalls the next numbered Scene.
Recalls the previous numbered Scene.
Recalls the Scene number assigned to
PARAMETER 2. Press and hold for more than
two seconds to assign the current settings to
that Scene number.
Same as the TAP key on the top panel.
- 30 -

Assigning a feature to a [USER DEFINED KEY]

1. Touch the Keys button.
The screen where you can select the
desired [USER DEFINED KEY] is displayed.
Buttons A–F correspond to [USER
DEFINED KEYS] A–F.
2. Touch the Key button that corresponds to the [USER DEFINED KEY] that you want
to configure.
The configuration screen is displayed.
3. Scroll through the Function list and select the desired feature.
4. Scroll through the Parameter 1 list and select the desired item.
If items are available in the Parameter 2 list, select the desired item.
5. Touch the OK button.
Toolbar
TF Series
Reference Manual