Replacing A Drum Unit - Konica Minolta bizhub 367 Quick Manual
Hide thumbs
Also See for bizhub 367:
- Quick start manual (246 pages) ,
- User manual (154 pages) ,
- Installation manual (13 pages)
Table of Contents
Advertisement
5
5.4.3
Replacing a Drum Unit
Tips
-
After Drum Unit replacement step 1 has been completed, check that the circled lock is located at the
position indicated by a dashed line, then execute step 2. If the circled lock is not located at the position
indicated by a dashed line, press in the blue knob of the Drum Unit to release the lock.
-
Your service representative will collect your used Drum Unit. Put it in a black plastic bag and store it
in a box by itself.
-
A Drum Unit may be damaged due to exposure to light. Do not take a Drum Unit out of a black plastic
bag until just before it is to installed.
-
If a Drum Unit was replaced, be sure to adjust the gradation. For details on how to adjust the gradation,
refer to the User's Guide CD/DVD.
7CAUTION
-
The inside of this product has areas subject to high temperature, which may cause burns.
When checking the inside of the unit for malfunctions such as a paper misfeed, do not touch the loca-
tions (around the fusing unit, etc.) which are indicated by a "Caution HOT" caution label. A burn could
result.
5-12
When a message appears to replace consumables or carry out cleaning
Unpacking the drum unit
5.4
bizhub 367/287/227
Advertisement
Table of Contents
