Operation Flow; Checking The Cable Connection; Checking Network Settings Of This Machine - Konica Minolta bizhub 367 Quick Manual

3.2 Scan-to-Send function

Operation flow

The following describes a transmission flow. For details, refer to page 3-29.
1
Loading the original
2
Selecting a destination
% Select a registered destination, and check the settings such as the file type and image quality.
3
Press the Start key.
% Press the Start key to scan the original.

Checking the cable connection

Check that a LAN cable is connected to the LAN port of this ma-
chine and the green LED is on.

Checking network settings of this machine

Tap [Utility], and select [Device Information].
Check that the IP address is displayed.
• For IPv4 environment
Tips
- In Mac OS X10.6, the default settings are available during general use, but you need to change settings
depending on your network environment.
- If no IP address is displayed, you need to configure the network. Tap [Utility], and select [Administrator
Settings] - [Network Settings] - [TCP/IP Settings]. Configure the required settings to suit your environ-
ment. For details, refer to the User's Guide CD/DVD.
bizhub 367/287/227
• For IPv6 environment
3
3-23