Removing The Lens - NEC NP-PH1201QL User Manual

Removing the lens

Before changing the lens, always make sure the projector is switched off and fully
disconnected from its power supply.
When changing the lens, avoid using excessive force as this may damage the
equipment.
Take care to preserve the original lens packaging and protective caps for future use.
The projector will not power on without the lens and lens hood fitted.
1. Loosen the two captive screws
using the provided key.
2. Remove the cover.
1
on the lens remote lock cover, then release the lock
Important Information
1
1
2
2
Page 31