Adjusting The Lens; Adjusting The Brightness Of The Projected Image (Light Setup) - NEC NP-PH1201QL User Manual

Important Information

Adjusting the lens

1. Press to access the menus.
MENU
2. Press the
LEFT
until the
Configuration
3. Press the
DOWN
submenus, then navigate to the
submenu by pressing the
button.
4. Press to toggle between
ENTER
and
Focus Zoom
zoom and focus using the arrow buttons as
follows:
•
In
Lens Position
shifts the lens in the indicated direction.
•
In
Focus Zoom
focus,
LEFT
5. When adjustment is complete, press
return to the higher menu level. Press
repeatedly until you reach the top level and exit
the menus.

Adjusting the brightness of the projected image (Light Setup)

To adjust the brightness of the projected image:
1. Press the
LIGHT
appears.
2. Press the
LEFT
adjust the light output.
3. When adjustment is complete, press
return to the higher menu level. Press
repeatedly until you reach the top level and exit
the menus.
Page 26
or arrow button repeatedly
RIGHT
menu is displayed.
arrow button once to access
Lens Control
or
LEFT RIGHT
Lens Position
modes. Adjust lens position,
mode, each arrow button
mode, and
UP
and adjust zoom.
RIGHT
button. The
Light Setup
and arrow buttons to
RIGHT





arrow


adjust
DOWN
to
EXIT
EXIT
screen

to
EXIT

EXIT
Title Select
Configuration
Configuration
Lens Control
Lens Position

•


Focus
+

•
-

Light Setup
Adjust
100 [%]








Zoom
- +
•
 
(*)

