Switching The Projector Off; Selecting A Title - NEC NP-PH1201QL User Manual

Switching the projector off

1. Press the
POWER
longer.
The light source switches off and the projector
begins cooling down. During the cooling down
process, the
SYSTEM
amber. The fan continues to work and a message
is displayed on the LCD screen to show that the
projector is still not switched off.
When the fan switches off, the
indicator lights a steady amber to indicate that the
projector is now in STANDBY mode.
2. To switch the projector off completely, turn the
power switch OFF.
Do not turn off the projector from the power switch or disconnect the power cord while the projector
is working or cooling down.
Use only the power cable provided.
Ensure that the power outlet includes a ground connection as this equipment MUST be earthed.
Handle the power cable carefully and avoid sharp bends. Do not use a damaged power cable.

Selecting a title

Connect the title you wish to display and switch on the input source, then switch on the projector. If
necessary, unlock the keypad.
If the title is assigned a shortcut, press the shortcut button and the projector will begin displaying the
title.
If there is no shortcut assigned to the title:
1. Press the
MENU
2. Press the
LEFT
the list of menus until
LCD screen. The list of menus is as follows:
•
Title Select
•
Configuration
•
(Title Setup)
•
Information
•
...
button for three seconds or
status indicator flashes
SYSTEM
button.
or button to cycle through
RIGHT
appears on the
Title Select
status


Important Information
Title Select


Page 23