Table of Contents
Advertisement
Important Information
The unit is never to be operated if the unit is defective or the cover or seal is damaged.
The end user is not allowed to open or modify the product.
No maintenance allowed by end user.
Do not open the cabinet. There are no user serviceable parts inside.
No service is allowed except by authorized personnel.
Installation and handling
HEALTH PRECAUTIONS TO USERS VIEWING 3D IMAGES
Before viewing, be sure to read health care precautions that may be found in the user's manual
included with your 3D eyeglasses or your 3D compatible content such as Blu-ray Discs, video
games, computer's video fi les and the like.
To avoid any adverse symptoms, heed the following:
•
Do not use 3D eyeglasses for viewing any material other than 3D images.
•
Allow a distance of 2 m/7 feet or greater between the screen and a user. Viewing 3D images
from too close a distance can strain your eyes.
•
Avoid viewing 3D images for a prolonged period of time. Take a break of 15 minutes or longer
after every hour of viewing.
•
If you or any member of your family has a history of light-sensitive seizures, consult a doctor
before viewing 3D images.
•
While viewing 3D images, if you get sick such as nausea, dizziness, queasiness, headache,
eyestrain, blurry vision, convulsions, and numbness, stop viewing them. If symptoms still
persist, consult a doctor.
•
View 3D images from the front of the screen. Viewing from an angle may cause fatigue or
eyestrain.
The projector must be installed only by suitably qualified personnel, in accordance with local
building codes.
Consult your dealer for information about transporting and installing the projector. Do not
attempt to transport and install the projector yourself. The projector must be installed by qualified
technicians in order to ensure proper operation and reduce the risk of bodily injury.
Do not point the projection beam toward other people or reflective objects.
The projector should be installed as close to the power outlet as possible.
The power connection should be easily accessible, so that it can be disconnected in an emergency.
Place the projector on a flat, level surface in a dry area away from dust and moisture. Tilting the
front of the projector up or down from level could reduce laser life. Do not put the projector on its
side when the laser is on. Doing so may cause damage to the projector.
Page 10
Advertisement
Table of Contents
