Kyocera TASKalfa 356ci Operation Manual page 284

Using Various Functions > Functions
Item
Off
Border Erase Border
Sheet
Back Page
Border Erase Border
Book
Gutter
Back Page
Individual Border Top
Erase
Bottom
Left
Right
Original
Orientation
Back Page
*1 The input units can be changed in System Menu.
Measurement (page 8-13)
*2 This function can only be used when the optional OCR Scan Activation Kit is installed.
Value
Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00 to 2.00"
(in 0.01" increments)
Same as Front Page, Do Not Erase
Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00 to 2.00"
(in 0.01" increments)
Same as Front Page, Do Not Erase
Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00 to 2.00"
(in 0.01" increments)
Top Edge on Top, Top Edge on Left,
*2
Auto
Same as Front Page, Do Not Erase
6-38
Description
Set the border erase width.
Set the value by selecting [+] or [-].
Select [# Keys] to use the numeric keys for
entry.
For 2-sided originals, select [Back Page] and
then select [Same as Front Page] or [Do Not
Erase].
Set the border erase width.
Set the value by selecting [+] or [-].
Select [# Keys] to use the numeric keys for
entry.
For 2-sided originals, select [Back Page] and
then select [Same as Front Page] or [Do Not
Erase].
Set the border erase width.
Set the value by selecting [+] or [-].
Select [# Keys] to use the numeric keys for
entry.
Select the orientation of the original document
top edge to scan correct direction. Select
[Original Orientation] to choose orientation of
the originals, either [Top Edge on Top] or [Top
Edge on Left]. Then select [OK].
For 2-sided originals, select [Back Page] and
then select [Same as Front Page] or [Do Not
Erase].
*1
*1
*1