Table of Contents
Advertisement
Operation on the Machine > Handling Destination
Handling Destination
This section explains how to select and confirm the destination.
Specifying Destination
Select the destination using either of the following methods except entering address directly:
•
Choosing from the Address Book
Choosing from the Address Book (page 5-39)
•
Choosing from the External Address Book
•
For details on the External Address Book, refer to the following:
Command Center RX User Guide
•
Choosing from One Touch key
Choosing from the One Touch Key (page 5-41)
•
Choosing from the Speed Dial
Choosing from the Speed Dial (page 5-41)
•
Choosing from the FAX
FAX System 10 Operation Guide
NOTE
• You can set the machine up so that the address book screen appears when you select the [Send] key.
Default Screen (page 8-28)
• If you are using the products equipped with the fax function, you can specify the fax destination. Enter the other
party number using the numeric keypad.
Choosing from the Address Book
Select a destination registered in the Address Book.
For more information about how to register destinations in the Address Book, refer to the following:
Registering Destinations in the Address Book (page 3-22)
1
2
In the basic screen for sending, select [Address Book].
NOTE
For details on the External Address Book, refer to the following:
Command Center RX User Guide
Select the destinations.
Select the checkbox to select the desired destination from the list. The selected destinations
are indicated by a checkmark in the check box. To use an address book on the LDAP server,
select "Addr Book" [Ext Address Book].
You can change the order in which the destinations are listed by selecting [Name] or [No.]
from the "Sort".
NOTE
To deselect, select the checkbox again and remove the checkmark.
5-39
Advertisement
Table of Contents
Troubleshooting
