Entering And Leaving The Pavement; Turning On The Pavement - Branson 00 Series Operator's Manual

ENTERING AND LEAVING THE PAVEMENT

Keep implement
Keep implement
Perpen-
low
dicular to
wheels are on
pavement!
the pavement
Enter or leave the pavement in a
perpendicular direction. When climb-
ing onto the pavement, lower the im-
plement to achieve a lower center of
gravity. Once all wheels of the tractor
are on the pavement, raise the im-
plement.
•
M a k e s u r e t o c o n n e c t t h e
low until rear
until rear
brake pedal. Otherwise, the
wheels are on
the pavement tractor may turnover due to
one-sided braking.
•
W h e n y o u c r o s s a d i k e o r
raised ground to enter or leave
the pavement, use loading
ramps with sufficient strength,
LXN5O419A
and lower the implement to
achieve a lower center of grav-
ity.
•
Drive backward when climb-
ing up a steep slope, and drive
forward when climbing down.
•
Enter or leave the pavement
in a perpendicular direction.
When climbing onto the pave-
ment, lower the implement to
achieve a lower center of grav-
ity. Once all wheels of the trac-
tor are on the pavement, raise
the implement.
WARNING
NOTE
OPERATION & WORK

TURNING ON THE PAVEMENT

Depress the pedal while
steering the wheel!
When making a turn, reduce the en-
gine rpm and make a slow turn.
When making a turn on the pave-
ment, remove the connector of the
brake pedals. Depress the brake
pedal on the side to which to make
a turn, while steering the wheel, this
will allow the tractor to make the turn
without moving ahead. Make sure to
keep the implement in the up posi-
tion when making a turn.
5
15
-
LXN5O420A
5