Solution 2.3-I Insert Model - Enerzone solution 1.8-I Owner's Manual

5.2 Solution 2.3-I Insert Model

Fuel Type
Test Standards
Maximum recommended heating area : 500 to 2100 square feet
Heating capacity* – BTU/hr., EPA test wood : 49000 BTU/h.
Heating capacity* – BTU/hr., seasoned cordwood : 75000 BTU/h.
Optimum efficiency : 77%
*Why is the BTU indicated on the EPA label smaller than the one advertised?
You will notice a difference between the BTU output as indicated on the unit's white EPA label affixed to the glass and the
BTU as advertised on our web site and/or product literature. The maximum BTU output we advertise for this unit is what
will be obtained with a full load of seasoned cordwood inserted inside the firebox. The EPA output, on the other hand, is what
has been obtained during emissions testing. The EPA test procedure requires that a special type of wood be used and
positioned inside the firebox in a manner that does not represent the way the firebox volume would normally be utilized using
seasoned cordwood. The EPA test load is typically much smaller. Hence, the BTU as per the EPA label is reduced. The BTU
output that should be considered by a normal user is the one we advertise for seasoned cordwood.
Shipping Weight
Firebox Volume
Firebox Floor Area 21" x 16 5/8" (533mm x 422mm)
Door Opening Size
Recommended
Log Size
Flue Outlet
Optional
Components
Cordwood
ULC S628 (CSA B366.2) & UL 1482 residential.
400lbs (181kg)
3
2.3 cu.ft. (0.065 m )
17.5" wide x 9" high (445 mm wide x 229 mm high)
20" x 6" Dia. (508 mm x 152 mm) if loading sideways
6" (152 mm) diameter (vertical)
- 29" x 44" Faceplate
- 32" x 50" Faceplate
26