Truck Bed Operation - Cushman Hauler 800XE Owner's Manual

Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
With the switch in TOW position:
• the controller is deactivated
• the electronic braking system is deactivated which
allows the vehicle to be towed or roll freely
• the warning beeper is deactivated
With the switch in RUN position:
• the controller is activated
• the electronic braking system and warning beeper fea-
tures are activated.

Truck Bed Operation

Failure to follow these instructions can cause personal injury, damage the vehicle or cause the
vehicle to tip over. Be aware of the load when you operate the vehicle. Read, understand and fol-
low the warning label attached to the front of the load bed.
Do not allow passengers to ride in the truck bed. A sudden move or stop can cause severe injury
Before operating, make sure no one is behind the vehicle.
A load bed warning label is attached to the inside front of the truck bed. Understand and obey the warnings on this label
for safe operation of the vehicle.
• See the load bed warning label for maximum load.
• Position the load in the truck bed as far forward as possible.
• Make sure the center of gravity of the load is within the height limit shown on label.
• Secure the load to the truck bed.
• Be aware of the load when you operate the vehicle.
• Do not let passengers to ride in the truck bed. Do not drive the vehicle with the truck bed lifted or with the tailgate
unsupported.
or death to passengers in the truck bed.
Owner's Guide
OPERATING PROCEDURES
B
23