Light Bulb Replacement; Headlight; Taillight; Fuse Replacement - Cushman Hauler 800XE Owner's Manual

Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.

LIGHT BULB REPLACEMENT

To decrease the risk of premature bulb failure, do not allow your fingers to contact new bulbs. Use clean, dry

Headlight

Rotate the bulb socket a quarter turn to the left to unlock.
Remove the bulb and socket. Install new bulb and rotate
the socket a quarter turn to the right to secure.
Replacement bulbs are available from a local Distribu-
tor, an authorized Branch or the Service Parts Depart-
ment.

Taillight

To replace the taillight and brake light bulb, lift the rubber bezel from
around the edge of the taillight and remove the lens. Install the
replacement bulb and replace the lens.
Replacement bulbs are available from a local Distributor, an authorized
Branch or the Service Parts Department.

FUSE REPLACEMENT

The fuse block is found below the driver seat. Lift the seat bottom to access the fuses.
Remove the old fuse and replace with a new fuse of the same type and size.
Fuses are available from a local Distributor, an authorized Branch or the Service Parts Department.
paper or paper towels to touch the glass part of the bulb.
Owner's Guide
MAINTENANCE
Inside of Cowl
Headlight Housing
Screw
Headlight Bulb
Roll rubber bezel away
from body.
Taillight
B
35