Connecting A Device To The Output Terminal Block - Omron S8BA-24D24D120LF User Manual

3 Installation and connection

3-2-2 Connecting a device to the output terminal block

1.
Connect devices you want to back up to output terminals of this unit.
DC power supply device
(DC24V)
2.
When using the UPS monitoring software or the I/O signal, connect the unit to the target
device with a connection cable. For details about the connection procedure, see "5
Maintenance and inspection", and "6 To perform shutdown processing of the
devices when a power failure occurs".
44
UPS
3-2 Connection
Connected device
S8BA-24D24D□□□LF